Users choose the right centrifuge according to the use occasion, the nature of the material and other factors to achieve the desired purpose. There are three issues that must be paid attention to when selecting the model as follows.
The materials separated by the centrifuge are generally corrosive, and the materials in contact with the material part of the material, must be able to meet the requirements of corrosion resistance to ensure safe use.
Structural parts material type (304, 321, 316L, titanium plate), sealing ring, gasket material, surface treatment measures, and filter cloth material, etc. should be determined during the selection. You can inform the manufacturer of the nature of the material (chemical properties, temperature during separation, etc.) when selecting the model so that we can make recommendations based on the characteristics of the medium and specify them in the order to ensure the anti-corrosion requirements of the centrifuge.
If the material handled by the centrifuge contains organic solvents and other flammable and explosive substances, the centrifuge should have explosion-proof performance explosion-proof performance is determined depending on the explosion-proof requirements of the process. In fact, the centrifuge to achieve a true sense of explosion-proof, in mechanical, electrical control, accessories configuration to take a variety of measures, such as: electrical control system: explosion-proof isolation grid, non-contact energy brake system, electrostatic grounding, explosion-proof automatic control.
LWFX Gas-tight Decanter Centrifuges (Explosion-proof Type)
Separation performance is one of the most basic functions, including the effect of separation, washing effect, processing capacity, automation degree, etc. At the beginning of the order, because of the difference in the nature of the material, including the viscosity of the material, particle size, density, solid-liquid ratio of the slurry and other factors, it is difficult to accurately determine the final separation effect, and the separation factor of the centrifuge is generally used to measure the separation effect of the centrifuge.
The washing mentioned here refers to the washing of the filter cake. For some materials, the filter cake also needs to be washed by washing liquid, and some even need to be washed several times to meet the requirements, which requires the configuration of washing tube. Washing effect, washing time and washing tube aperture, arrangement position, structure form has a great influence.
HUADA sells all kinds of industrial centrifuges, our decanter centrifuge adopts double motor and double frequency drive method, better differential adjustment; more adaptable to changes in working conditions, to ensure the separation effect; using dynamic feedback design, effectively reduce power consumption. HUADA adopts hydraulic gearbox system, to ensure that the liquid is highly clarified after treatment, to avoid the breakage of parts caused by overload, to minimize the possibility of material clogging. . If you need, please contact us for more details.
