Home > News

Selection of Centrifuge Configuration

Aug. 21, 2020

Selection of Centrifuge Configuration

Feeding Type of Centrifuge

Selection of Centrifuge Configuration

Centrifuge Inclined Feeding Technology

Selection of Centrifuge Configuration

During the operation of the centrifuge, uneven distribution may often lead to large machine vibration, poor separation effect and low treatment capacity, which seriously affects the product quality and equipment service life. to better solve the problem, our company has developed an inclined feeding distribution device based on the side distribution and middle distribution.

This device adopts a unique streamlined design based on the principle of fluid mechanics, which can improve the distribution balance and evenness and reduce the distribution vibration for the materials with high viscosity and poor fluidity.

The distribution plate, with the circumferential solid discharge port projection in sinusoidal distribution, forms a cake layer with uniform thickness on the inner wall of the basket by controlling the material injection sector.

Selection of Centrifuge Configuration

Filter Cake Washing

Selection of Centrifuge Configuration

In separation process of most materials, the filter cake needs to be cleaned at the s same time of dehydration to realize the required purity of product. In separation process, there is not only moisture content index of filter cake but also the Index of measuring purity of filter cake. Thus, how to realize the washing requirement of filter cake in the shorter time and with fewer consumption of cleaning gent is very important for capacity, quality and energy consumption and cost.

Washing process: the cleaning liquid is separated while filter cake is cleaned at washing speed after high -speed exhaustion of liquid for filter cake in drum and then high-speed exhaustion of liquid is repeated again.

Form of sluicing pipe: washing of hole of sluicing pipe: atomizing nozzle washing of sluicing pipe; distributing device washing of swash plate.

Washing method: durative washing: impulse washing; cleaning gent washing with measurement.


Solid discharge mode

Selection of Centrifuge Configuration

CIP Online Cleaning of Centrifuge

Since the requirements for hygiene in the centrifuge market are increasing and the manual cleaning often brings new contamination while overcoming cross-contamination of materials, we have made continuous exploration and improvement in the equipment cleaning design and configured the CIP online cleaning system, which can realize all-round internal cleaning under the airtight or running state of the centrifuge and meet GMP specifications and hygiene requirements.

Selection of Centrifuge Configuration

  • wechat
Chat with Us